Subaru Store

We stock many performance parts for your Subaru. You may not see them here but chances are we will have them somewhere in our workshop.

Email us to purchase your parts. Keep a constant look out on this page too. We will be updating as soon as new parts arrives....

We are also stocking TurboXS, Perrin parts distributor.

Any TurboXS or Perrin parts that you are interested,

we can get it for you.


Call now ! 8222 1155

Perrin Limited Edition Recirc Blowoff valve (BOV)

Inefficient factory blow off valves (BOV) can hinder boost response during shifts and can damage your expensive turbo charger. PERRIN™ offers several choices for owners to choose the best solution to the problem.

Fully recirculated (Recirc shown)

For clients that demand proper air fuel ratios and idle quality we offer a fully recirculated BOV. The internal design allows the user to change the volume of recirculated air, spring tension and sound. It also incorporates an industry leading boost chamber that does not place pressure on the piston surface that would otherwise force it to open prematurely. It will only release pressure when shifting. This condition is common with our so called competitors, leading to serious tuning issues and reduced power.

Capable of handling more than 190 psi, there simply isn’t a boosted engine that our BOV can’t handle.

Limited Edition series available in red colour only.


S$400

APS Cold Air Intake System

The APS smooth bore cast aluminium cold air intake system and air filter delivers a huge volume of cold air to the turbo charger for maximum engine performance.

This APS cold air intake system is certainly the most cost effective way to achieve greater air flow, great looks and fantastic sound for your sedan or wagon.

Unlike ram pods which source hot air from under the bonnet, the APS system breathes cool air from the inner guard for the optimum engine performance and durability. More importantly the air through the APS high flow air intake system is consistent in temperature. This means that the engine management unit's temperature compensation system operates correctly - unlike devices that source air from the highly turbulent areas under bonnet.

And, it's easy to install with no cutting or drilling required.  

$480

Perrin Crank Pulley

The PERRIN Performance™ lightened crank pulley for the Subaru WRX and is engineered to reduce rotating mass, increasing horsepower and torque.

Weighing in at 1.2lbs, the PERRIN™ pulley is more then 4 lbs lighter then the stock crank pulley. The PERRIN™ pulley is not under driven and will not affect the life of your engine. The pulley is a redesigned, lighter rendering of the stock crank pulley.

Aftermarket, under driven, pulleys are prone to charging and drivability problems from being excessively under driven. The PERRIN Performance™ lightened crank pulley will have no effect on your cars charging system.

The PERRIN Performance™ pulley achieves power and performance by reducing the rotating mass of the crank assembly.

That reduction is effectively the same as removing 100 pounds of weight from your vehicle. The PERRIN Performance™ pulley will not wear out engine bearings or the oil pump, and will not add any additional vibration or noise.

$295

Perrin "Big MAF" Intake System

The PERRIN Performance™ Big MAF Intake System is a tuners dream.

Perrin Performance™ intake systems increase air flow and velocity providing additional horsepower and torque.

When used in tandem with the larger fuel injectors and aftermarket electronics the "Big MAF" intake will allow the user to tune an aftermarket ECU safely and accurately. Add resolution in fuel maps and load columns, compensate air fuel ratio, idle, and wide open throttle maps.

The PERRIN Performance™ Big MAF intake system is designed to prevent the Mass Air Flow output value from being pegged on heavily modified WRX engines. When using the factory MAF sensor and adding large amounts of boost the stock MAF sensor will max out and not allow additional compensation for air flow.

S$420

Perrin Fuel Rail Kit

The PERRIN™ fuel rails represent a true advancement in boxer engine fuel delivery. The PERRIN™ fuel rail kit is not just a replacement part. We have completely redesigned and redirected the fuel from the supply lines to the injectors. The PERRIN Performance™ Subaru fuel rail kit solves all fuel distribution problems dividing fuel evenly between the fuel pressure regulator and both banks of cylinders in the boxer engine.

PERRIN Performance™ fuel rails use high tensile, stainless steel fuel line constructed of an extruded Teflon liner incased inside a tightly woven stainless steel outer braid. Teflon lined fuel lines are completely impervious to any automotive fuel. Fuel line diameter is increased from 7/32 inch to 3/8 inch To increase flow rates. PERRIN™ Fuel rail kits are Pre-assembled using permanent crimp connectors which hold over 400 PSI.

S$700

TurboXS KnockLite

Detonation or "knocking" can destroy an engine in no time flat leaving you with a repair bill that can cost you thousands of dollars. So how do you KNOW that you are knocking BEFORE it's too late? The TurboXS KnockLite (TM) will detect even minor, inaudible detonation and flash the multicolored LED to alert you to the knock so that you can do something about it before it's too late. The KnockLite is a must-have product for anyone that is modifying their engine for more power. The KnockLite wires into either your factory knock sensor or into separate knock sensor (sold separately) that is mounted to your engine block. As an added bonus, the KnockLite also comes with a programmable shift indicator.

So why drive around hoping that your engine isn't knocking? Drive with confidence with the TurboXS KnockLite!

S$230

Perrin Intercooler Hose Kit ( 3pcs )

Insure equal boost to your entire Top Mount Intercooler) with the PERRIN PerformanceTM Intercooler Hose Kit. Unlike the mediocre factory plastic tube that is prone to failure in each of its corrugated pleats, the PERRIN™ part is built to resist high pressure and heat. Why lose boost when you don’t have too! Available in high-gloss red, blue and black.

S$280

BMS Motorsports - authorized reseller for Cusco parts

You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.

Get Flash Player